News:

New Board:  Forum Support (Below Chandlery). Forum Support to submit any questions.

Main Menu

Original Port and Starboard Nav Lights??

Started by Atavist, April 28, 2010, 03:51:43 PM

Previous topic - Next topic

Atavist

Does anyone know if the original port and starboard nav lights (chrome inset into the sheer stripe) on the pearson 365 are still in production/obtainable?  My starboard light green lens bubble has disappeared.. .not a clue how or when it went missing... I'd really reather not have to try and remove, reglass, recut for new lights, or install a rail light and leave the old ones not being used.


barrylab

Mine were gone when I bought the boat last October, but I found some Seachoice LED versions that fit the outline and holes perfectly. I found them in the Jamestown Distributors catalog, but they're not on the JD website, or the Seachoice website. They are Model #02151 ; JD PN SCP 02151, on Page 625. There is also the standard Seachoice Model #05151 ; JD PN SCP 05151. Under that there is a replacement lens set SPC 05161.

On page 629 of the same catalog, Sea Dog has it's version SDG 400180, and replacement lens set
at SDG 4001811

Jamestown Distributors is at 1-800-423-0030.

I'm not affiliated, but they sell at wholesale prices, and where I'm in the next state, UPS ground comes overnight. If you get the catalog, it's 8X10" and over 1000 pages of marine products.
"Relentless"
Pearson 365 Ketch modified as Cutter
1976 Hull #65
Weymouth, MA

Atavist

outstanding, thanks,... I'll give them a call.

Atavist

just put my order in for the 02151 LED versions.... only 21.34... too cheap to believe.... the guy agreed and thought that it may have been a mistake but ran it as listed... good stuff.

barrylab

I got the same deal, and when I asked they said it was the "case price", meaning if you bought a case of these this is the per pair price. I believe the catalog is meant for marinas to buy wholesale, but they don't seem to restrict sales at those prices.
"Relentless"
Pearson 365 Ketch modified as Cutter
1976 Hull #65
Weymouth, MA

Atavist

Hey whatever works  ;D
Mine shipped today... should get them soon... looking forward to plugging the hole in my topsides.

RayNWanda

(02151 LED versions) Guess I'm a dummy- I didn't find these. What's the rest of the part number? We may want some too.
Safari
Palacios, Tx.
Prout Snowgoose 37

barrylab

If you order them from Jamestown Distributors the PN is SCP 02151. Jamestown's number is in a previous post.
"Relentless"
Pearson 365 Ketch modified as Cutter
1976 Hull #65
Weymouth, MA

mzed

Just ordered a pair (I think) over the phone, for the same price. I'll post some notes once they arrive.
S/V Zeno
Ketch #123
Emeryville, CA

Bernie

I found the glass lenses at "Brewers Marine supplies" in Hamilton ON. They are a wholesale supplier to the marine industry and have a retail store at their Hamiltom warehouse. Just the lenses not the entire unit. Good luck!

mzed

Quote from: mzed on May 13, 2010, 11:14:09 AM
Just ordered a pair (I think) over the phone, for the same price. I'll post some notes once they arrive.

They arrived, fit perfectly and were an easy and nice upgrade.  Anybody know of an LED stern light that's just as easy?

mz
S/V Zeno
Ketch #123
Emeryville, CA

barrylab

All I could find was the SCP-02361 LED Rectangular Transom Light. It's about 1/2 inch smaller overall, but I made it fit. The screw holes fit inside the original oval hole, so I made a wooden backing block (with a hole for the wires in the center), and screwed into it from outside. The outside rim is seated into the original gasket, and doesn't leak ( I hosed it down to check ). At ~20 dollars, I thought it was worth a try, and I like how it came out. I got it at the same place, Jamestown Distributors, but it's not quite a simple as the port & starboard solution.

S/V Relentless
Hull #65
"Relentless"
Pearson 365 Ketch modified as Cutter
1976 Hull #65
Weymouth, MA