Various parts

[RayNWanda]

 We have quite a bit of stuff that we salvaged off our other boat. Locker doors, drawers, winches (none self tailing), dining table, Various pieces of deck hardware, cabin sole hatches, ect. We didn't need much of it for Abracadabra, so now we need to move it. If you have a damaged/missing locker door, drawer, need a winch, ect. drop me a note and I'll see if I have it. hurricane198r at yahoo dot com

[Dale Tanski]

Ray,
Funny you should ask...
What size is the smallest winch you have available? 
Do you have any stanchion bases?  There are two styles, one are I believe straight and the others are angled at I believe 4 degrees. 
Do you have the angled boarding gate brace for the forward stanchion?
Do you have the port side dorade fiberglass base?
If the price was right I might take a 20"x20" Bomar opening part of the hatch frame.  I am always worried about getting a sheet caught in one and ripping it off.
What kind of shower sump and pump did the old boat have?
Did you have a stainless lever on your throttle control?
In the cockpit, did you have teak trim rings around the sheet cubbies?  Were they the early crappy ones that looked oval but had a square hole like mine or were they the oval ones with the oval hole?
Main or mizzen gooseneck?
Since you asked...   Dale

[RayNWanda]

 I'm at work until Tuesday-I will have to check on the winch and see what we have.
We have both goosenecks.
We don't have the other stuff.

Need a mast?- we have both. The main is damaged-both winches were torn off and there is a shallow dent where the winch pad was. I also had to rob the crown off the main. I guess the main would be considered a damaged blank. The mizzen is undamaged. We have both booms complete.
A steering pedestal, (somebody stole the wheel before I could get it), spinnaker pole.

Trying to remember what else we have...

[slokat]

Spinnaker Pole?  I need that - but, shipping would probably be impossible to Morro Bay, Ca....

[RayNWanda]

The spinnaker pole is pretty long- I will telescope it in and get a length and weight when I get home.

[SV Faith]

Hello Ray,

Any chance you have the original starboard cheek block for the jib? My boat is a P365 Ketch.

Cheers,

Dave

[RayNWanda]

We don't have it.

[sailorbob2008]

Do you have the teak surrounds for the storage "ports" in the cockpit.Both of mine were missing when I purchased SOLSTICE. Thanks in advance

[Dale Tanski]

If you go to Catalina Direct web site, they have teak surrounds that will fit if you modify the hole slightly.

Dale