I just installed an Edson pedestal with the 2 shift handles. I am using the C33 red Jaket / 3300 C teleflex shifter cable for the throttle. If anyone has this pedestal and the paragon transmission......what cable are you using....Is the 3300C big enough or do I have to go to the 60 series teleflex cable....64 teleflex cable.....information sure would make this easier.....thanks in advance....Billy
Also...will the 60 series fit in the cable holder I order from Edson....it does not look big enough...but I have not seen a 60 series cable ...yet....
I have the Edson setup with a Paragon transmission. The shifter cable is a big black cable. I couldn't find any markings on the cable to identify it further. The cable OD is about 1/2 inch. Hope that helps.
It does in the since ...the C33/3300C series are red and about 3/8 in diameter....I need to keep looking for the cable you have.....do you know of where I might get one....
Fraid I can't help on that - the cable came with the boat.
My throttle cable looks like the cable you describe - 3/8" OD and red jacketed.
The cable holder I ordered from Edson....is white plastic and the 2 cable holders look to small for the bigger cable....I do not know
mystery solved....
Edson contact info....1-508-995-9711
http://www.edsonmarine.com/marinestore/index.php?main_page=page&id=15&chapter=0
I need the aluminum cable holder...46.00+sh.... that is for the ......64 series Clutch control cable...73564-10...233.00