For those of you that just have to know...
While preparing to put Maruska's main mast in the boat barn this morning, I just decided to measure it. The length of the extrusion is 47'-1/4". Now this is my mast, for a ketch, yours could be longer or shorter depending on the corrosion on the bottom and how it was dealt with. This curious mind just wanted to know and what better conversation starter for this upcoming holiday party season than... you know, my main stick is 47'-1/4".
Dale
Maruska,
we've never met so I must be careful in addressing this question,
but, what kind of parties do you fresh water sailors go to where you open
conversations with a discussion of 'your main stick'?
ah
mine is 46ft 9in,but it is cold here this morning ;D
it is cool and wet here...but getting warmer later.....does that effect it....lol
Apparently I will have to go and measure the smaller one now...
Dale
Don't you know that size does not matter! Though my wife just smiles and shakes her head at that...
Get serious guys - or our site will get a bad reputation.
Carl
Sailors and good reputations asea...ahoy aha....life is what you read into it....it is just that our understanding is askew most...lol
Dale,
I am not near my boat but need to know the mast dia to have a mast boot made.
Thanks much.
Carl
"Sea Hiker"
For a mast boot you probably want the circumference instead of the diameter. Its 21 and 1/8 inches.
Our mast base is 27 and 3/8. Yours may be different.
Those numbers work for me. I would highly recommend a company by the name of WATERBOOT. Their web site is - www.waterboot.com
I have owned their fine product for over the past 6 years on our P365 and I remove my mast every year. They make a great boot custom made for your boat. Tell them your make and model and they will have a boot to send you.
Dale
Thanks AGAIN Dale and SV Journey! Waterboot it is.
Carl