We are going to haul SOL and want to replace the cutlass bearing. Any one know the size I will need? My shaft is 1 1/8 but I don't know the od of the bearing or length.
Leo
The ketch uses 1 1/8 X 1 5/8 X 4 1/2, also known as "BELT" I would expect the cutter to use the same bearing, but you never know. We keep a spare.
We installed a PSS shaft seal too, we like it.
Thanks!
I'll have one in hand when we haul, if its the wrong one at least we tried!
Leo