Print Page - P365 bow chocks

Title: P365 bow chocks
Post by: gulfreachers2 on July 03, 2009, 10:05:47 AM

I seek a skene (curved out ears) bow chock to match existiing on my '77, P365 as follows;

aluminum (stainless or brass will also work but will need 2),
8" overall length
6 1/4 hole centers (not critical)
1 3/4" wide
1/2 " thick
2 1/2" high
1 1/2" opening for line

any thoughts or suggestions forprobable sources very much appreciated.

Thanks

gulfreachers2@aol.com, S/V Deborah

Title: Re: P365 bow chocks
Post by: EdHouston on July 03, 2009, 10:13:52 AM

Try here

http://www.nauticexpo.com/prod/sprenger/sailboat-warping-fairlead-22287-52846.html

Title: Re: P365 bow chocks
Post by: SailingSeaDragon on July 06, 2009, 09:46:54 AM

Have you talked with Rudy at D&R Marine?

D & R Marine, Inc
31J Mill Street
P.O. Box 921
Assonet, MA 02702
508-644-3001
drmarine.com

D&R marine purchased many of the assets of the bankrupt Pearson company including records original drawings, molds, and inventory... They are a wealth of information on Pearsons.

Garner

Title: Re: P365 bow chocks
Post by: INCOMMUNICADO on July 06, 2009, 12:46:43 PM

Garner thanks for the info I did talk with Rudy @ D and R Marine a while back about bow chocks he said they didn't have any and didn't know where to send me.I have been looking for a good replacement can't seem to find them yet. If anyone finds proper replacement bow chocks please let me know.Thanks Allen

Pearson 365 and 367

Pearson 365 and 367 => Pearson General Non-Mechanical System Maintenance and Repair => Topic started by: gulfreachers2 on July 03, 2009, 10:05:47 AM