Harken Mk 1, Unit2
Series/Date stamp: 2-491
Mfg date: April of 1991
Price: 1200 for entire set
Buyer pays shipping
Location: Foley, Alabama
Removed from a 1982 Pearson 367 during complete refit
When I removed the furler, it worked very well, but I did not want to keep it because I replaced almost everything on the boat and didn't want old left-over hardware.
Link to more pictures:
https://bodylens.com/ForSale/index.php?album=Harken-MKI-Roller-Furler
Videos showing swivels work:
https://youtube.com/shorts/O8W4lDwZCPg
https://youtube.com/shorts/yf7t3xqF98Q
INCLUDED:
Manual (1)
Foils: Middle, 7' (4)
Foils: Bottom, 9' 4 1/2" (1)
Foils: Upper, 4' 7" (1)
Torque Tube (1)
Drum Assembly (1)
Halyard Swivel (1)
Locking Collar (1)
Feeder (1)
Foil Screws (24)
Foil Connecor Wedges (4)
Locking Split Cylinder (1)
Regular Foil Connecotrs (5)
Bottom Foil Connector (1)
MISSING:
Foil Connector Wedge (1)
Prefeeder (1)
Headstay terminal (1)
Torque Tube Screws (several)
Spare ScrewsTop Foil Trim Cap (1)
Screws that hold the Drum Assembly together (several)
Furler line and hardware to lead aft to cockpit
MINOR DAMAGE:
Pitting on lower flange of drum (about 1/2" diameter area)
Crushed foil groove at top end of upper foil (small damage)