Pearson 365 and 367

Pearson 365 and 367 => Pearson 365/367 Mechanic Shop => Topic started by: peislander on August 29, 2016, 10:44:08 AM

Title: 365 mast
Post by: peislander on August 29, 2016, 10:44:08 AM
I need a new mast for my ketch rigged 365, any suggestions?
Title: Re: 365 mast
Post by: S/V Deo Volente on August 29, 2016, 11:05:57 PM
Main or Mizzen? Why does it need replacing?
https://www.dwyermast.com/families.asp?cat1ID=20&cat1Name=Masts (https://www.dwyermast.com/families.asp?cat1ID=20&cat1Name=Masts)
Title: Re: 365 mast
Post by: peislander on August 30, 2016, 08:04:52 AM
I was cruising along the south coast of Newfoundland, about 8 miles off of Burgeo, when the port side top shroud on the main mast let go at the turn-buckle. The mast snap off, just below the spreaders. With my stubby main mast my 365 ketch now looks like a minature schooner. Thanks for the website.
Title: Re: 365 mast
Post by: SailingSeaDragon on August 30, 2016, 06:26:27 PM
I would start with Rudy at DR Marine - he is very knowledgeable and VERY helpful. He purchased a lot of the parts, drawings, and records when Pearson went out of business. His website is only marginally useful but he is a great guy talk with... Who knows what he can get his hands on or who he will recommend.

http://www.drmarine.com/categories.asp


You might try Rig Rite - some boat left the factory with Kenyon spars.... These guys are knowledgeable - but expensive and a little short.

http://www.rigrite.com/A-Main/spar_M.html

Good Luck
Garner
Title: Re: 365 mast
Post by: peislander on August 30, 2016, 06:38:51 PM
Thanks for this Garner. I'm talking with my insurance adjuster tomorrow and after that I'll have a better
idea where I stand. I'll definitely give your suggestion a call and see what they recommend.
Again, thanks
Al Holman