Print Page - Fresh water circulation pump

Title: Fresh water circulation pump
Post by: SV Hope on October 15, 2013, 04:32:00 AM

Hi folks,

Has anyone replaced the fresh water circulation pump on the W40 with the Perkins equivalent? If you have, is there a part number &
supply source that you know of? I am told that there are two pumps that have been used on the Perkins 4.107, one has a 15mm shaft & the other a 16mm shaft. Not sure which one is suitable. Thanks

Michael

Title: Re: Fresh water circulation pump
Post by: Tilikum on October 22, 2013, 12:48:35 PM

Hi Michael, Check with parts4engines.com, they are in the UK. specialized in old Perkins. The prices are a lot lower than in the USA, paying probably easily for the freight. I use them so far successfully.
Good luck,
John

Pearson 365 and 367

Pearson 365 and 367 => Pearson 365/367 Mechanic Shop => Topic started by: SV Hope on October 15, 2013, 04:32:00 AM