I am getting no current from the overhead light wiring in the head. I am unable to trace where the wires become accessible and there is absolutely no play in the wires between the deck and overhead liner. Short of cutting out the liner I don't know what to do. Any suggestions?
I rewired Sol and found that the wiring to the light in the head would not pull out so I left it in place. To replace it I would just find the least exposed route on the inside. Don't think I would cut the liner out unless I could cover it with something.
good luck!
John/Leo....
I have the same problem with the Nav table over head light. It is unmovable and stiff wire.
No easy fix...I was afraid of that. Thanks Guys!