Print Page - Mizzen Mast Sheeve Size ?

Title: Mizzen Mast Sheeve Size ?
Post by: egoodhue on August 10, 2012, 08:08:43 PM

I was up the mizzen trying to put a new halyard on the port side and noticed that only the starboard side of teh mast head had the sheeves forward and aft. Does anybody know the OD and ID of the mizzen mast sheeves? could not find the dimensions in a search here although saw some of Dale's pictures>

Thanks
Ted
SV "Fantasia"
Hull #120

Title: Re: Mizzen Mast Sheeve Size ?
Post by: INCOMMUNICADO on August 11, 2012, 07:03:41 AM

Ted,The pin size on mine is 3/8"x2" the sheeve is 2" OD you could use 1 3/4. Hope this helps. Allen

Title: Re: Mizzen Mast Sheeve Size ?
Post by: Dale Tanski on August 11, 2012, 07:56:59 AM

Allen is correct. In addition, the width of the sheeve is 9/16".

Dale

Title: Re: Mizzen Mast Sheeve Size ?
Post by: egoodhue on August 12, 2012, 06:53:04 AM

Thank You Dale and Allen
Ted

Title: Re: Mizzen Mast Sheeve Size ?
Post by: DreaminFred on November 22, 2017, 01:20:36 PM

Are these the same measurements as the main mast sheaves?

fred

Pearson 365 and 367

Pearson 365 and 367 => Pearson General Non-Mechanical System Maintenance and Repair => Topic started by: egoodhue on August 10, 2012, 08:08:43 PM